Monday 9 October 2017

Making handles...

For this step by step tutorial, I thought I would show you some of the methods you can use to make handles. Of course, the easiest option is to use webbing which can simply be cut to length and stitched into place. It comes in a range of widths and colours, making it a great option for beginners.

For fabric handles, there are lots of different options for how to make them, depending on what they will be used for. Here, I will show you three versions with step by step instructions to follow.

Version 1:
The folded handle uses only the fabric and is one of the simplest to make. It is perfect for lightweight use on bags. To make one, follow the instructions below:

Cut a length of fabric, this example is 4" wide.
Fold in half down the length, wrong sides together, leaving a 2" wide strip. Press along the fold.
Fold both of the raw edges in towards the centre fold, so your strip appears to be 1" wide. Ensure the raw edges are touching the centre fold inside and press.
Pin along the length and top stitch down both sides to hold it all in place.  

Version2:
The reinforced tube uses a length of Petersham enclosed within a tube of fabric. This makes a stronger and stiffer handle, using less fabric than the above method:

Cut a length of fabric and a length of Petersham. The width of fabric should measure double the width of your Petersham + 3/4" for seams and room to ease the Petersham in.
Fold in half right sides together along the length of the fabric and pin the raw edges together.
Stitch down the edge using a 1/4" seam allowance.
Roll the tube of fabric so the seam is laid down the centre. Press the tube flat, with the raw edges pressed open.
Turn the fabric through, a bodkin is really helpful as this can be tricky. Thread the Petersham into the tube and ensure the seam is laying down the centre of one side.
photo showing front and back view
Topstitch down the entire length on both edges of the tube to hold the Petersham and fabric in place.
photo showing front and back view

Version3:
The quilted handle provides an extra bit of padding and some structure by using wadding or batting within the fabric wrap:

Cut a length of fabric and a length of batting/wadding to suit your desired width. The example below uses a 3 1/2" width of fabric with a 1 1/8" width of wadding.
Place the wadding onto the wrong side of the fabric. Fold one edge over the top of the wadding, measuring around 1" so it almost covers the wadding. Pin along the length to hold this in place.
Fold the opposite edge over 1/2" and press. Now fold this over the edge of the wadding and press to create a neat fold for the outer edge of the handle.
Pin along the length, making sure the folded edge in the centre covers the raw edge, enclosing the wadding within the fabric.
Sew through all of the layers as close to the seam as possible. This should be roughly in the centre of the strap and catch all of the layers of fabric into the seam. Remember this is topstitching the fabric as well as holding all of the layers together so keep it straight and neat.
photo showing front and back view
Topstitch down both sides with equal spacing to hold the layers in place and create the quilting. With wider handles, you may wish to stitch additional rows.


Mx

No comments:

Post a Comment